RATO Course Putty is a high-performance wall preparation material made from white cement, graded aggregates, polymers, and additives, mixed with water at the time of application. It is designed for smoothening and filling interior and exterior plastered surfaces, providing a strong and durable base.
The putty offers damp and weather resistance, helping protect walls in humid conditions. It is an effective replacement for traditional POP or gypsum, delivering better bonding and long-lasting strength. This Putty enhances surface durability and is ideally applied before the use of fine RATO putty.
Type: RATO Course Putty Brand: —Mithila Paints Pack Size: 30kg /40kg bags. Drying Time: 2 to 4 Hrs Thinging Ratio: up to 5%
Features
-
Premixed and pre-packed product for ease of use
-
Designed for smoothening and filling uneven wall surfaces
-
Suitable for both interior and exterior applications
-
Ideal for plastered cement-based surfaces
-
Provides strong adhesion to masonry and plaster
-
Helps achieve a uniform and level surface
-
Enhances durability of subsequent paint or texture coatings
Best Performance Usage
RATO Coarse Putty delivers best results when applied on properly cured and well-prepared plastered surfaces, creating a strong, smooth, and durable base for paints and decorative finishes.
Surface Preparation
The surface must be clean, dry, and free from dust, loose particles, grease, or any previous coating to ensure proper bonding and a uniform finish. Any cracks or major surface defects should be repaired prior to application.
Application Methods
Can be applied using suitable tools based on surface size and site requirements, following standard application techniques.
Paint Spray
Suitable for large surface areas where fast application is required, ensuring uniform material distribution.
Paint Brush
Recommended for edges, corners, joints, and small areas where controlled application is needed.
Paint Roller
Effective for flat wall surfaces, allowing even spread and consistent thickness.
Preparation
Mix the product thoroughly with the recommended quantity of clean water to achieve a smooth, workable, and uniform consistency before application.
Directions for Use
Apply RATO Coarse Putty evenly on the prepared surface using the selected application method. Level the surface properly and allow sufficient drying time before sanding or applying subsequent coats or finishes.
Additional Notes
-
Avoid application on damp or wet surfaces
-
Protect freshly applied putty from water and dust during drying
-
Proper curing improves surface strength and finish quality
Related Products
Type: CASTLE ( DHOLPUR FINISH ) TEXTURE
Brand: Roam 369
Pack Size: 25 KG Bags
Drying Time: 24 to 28 Hours (surface dry, depending on temperature and humidity)
Coverage: 55–60 sq.ft. / 25 kg (depends on surface condition)
Thinning Ratio: 5–15% with clean water
Type: CASTLE ( DHOLPUR FINISH ) TEXTURE
Brand: Mithila Paints
Pack Size: 25 KG Bags
Drying Time: 24 to 28 Hours (surface dry, depending on temperature and humidity)
Coverage: 55–60 sq.ft. / 25 kg (depends on surface condition)
Thinning Ratio: 5–15% with clean water
Type: Roam369 Rustic Texture
Brand: Roam 369
Pack Size: 5 Kg / 23 Kg / 25 Kg
Drying Time: 6–8 hrs (depending on temperature and humidity)
Coverage: 70-75 sq. ft. / 25 kg (depends on surface condition)
Thinning Ratio: Up to 5%
Type- Texture Scratch Finish – 30KG BAG (E-Texture)
Brand- Mithila Paints
Pack Size: 30 Kg
Drying Time-: hard dry – 6–8 hrs, recoat- 24–48 hrs (surface dry, depending on temperature and humidity)
Coverage: 65–75 sqft / 30 kgs
Thinging ratio: up to 5%
Type: Babbles Spray Finish
Brand: ROAM 369
Pack Size: 25 KG / 23 KG / 5 KG
Drying Time: Surface dry time 2 – 4 hrs (depending on temperature and humidity)
Coverage: 140 – 150 sq. ft / 25 KG (Depends on surface condition)
Brand: Mithila Paints
Drying Time: 2–4 hours (surface dry, depending on temperature and humidity)
Coverage: 150–175 sq. ft. / 25 kg (Depends on surface condition)
Thinning Ratio: Up to 5%
Brand: Roam 369
Drying Time: 2–4 Hours (surface dry, depending on temperature and humidity)
Coverage: 150–175 sq. ft./ 25 KG (depending on surface condition)
Thinning Ratio: Up to 5%
Type: Roam369 AMAZON
Brand: Roam 369
Pack Size: 25 Kg Bag/ 23 Kg bag / 5 Kg Bag
Drying Time: 24 to 28 hrs (surface dry, depending on temperature and humidity)
Coverage: 150 – 175 sq. ft. / 25 kg (Depends on surface condition)
Thinging Ratio: 5–15% with clean water
Type- Texture Scratch FinishÂ
Brand-Â Mithila Paints
Pack Size: 25 Kg
Drying Time-: hard dry – 6–8 hrs, recoat- 24–48 hrs (surface dry, depending on temperature and humidity)
Coverage: 55-65 sqft / 25 kgs
Thinging ratio:Â up to 5%
Type- RATO Fine Putty
Brand- Mithila Paints
Pack Size: 30 Kg
Drying Time-: touch dry- 2–4 hrs, hard dry- 8–24 hrs (surface dry, depending on temperature and humidity)
Coverage: 400–500 sqkft / 30 kgs
Mahesh Halabhavi –
Reliable product from Mithila Paints with consistent quality. Helps achieve a professional wall finish easily.
[...]Smita Mokashi –
The putty has excellent grip on cement and plastered surfaces. Worth using for quality wall finishing.
[...]Annarao Birajdar –
Smooth application and good working time. Makes wall preparation simple and efficient.
[...]Sanchita Mhamane –
Used it for renovation work and the outcome was very neat. No peeling or cracks after drying.
[...]Sanddep Iramni –
Rato Course Putty dries well and gives a firm surface. Helps improve paint durability and finish.
[...]Arya Bharti –
This putty provides a strong base and hides surface imperfections effectively. Highly satisfied with the results.
[...]kamini –
Mithila Paints has done a great job with this putty. Ideal for surface levelling before painting.
[...]Bharti Jadhav –
Easy to mix and apply, even for first-time users. Walls look strong and well-prepared after application.
[...]Nikam Rohini –
The product delivers exactly what it promises. Excellent coverage and long-lasting performance.
[...]Mane Mahesh –
RATO Course Putty improves wall smoothness noticeably. Paint application becomes much easier after using this.
[...]Pradeep Pathak –
Very good quality putty with consistent texture. Spreads easily and dries evenly without cracks.
[...]Rani patil –
I used it for interior wall repairs and the results were impressive. The finish feels solid and durable.
[...]Amol Landge –
Strong adhesion and quick setting make Rato Course Putty a reliable choice. Great base for both primer and paint.
[...]Shanti Mehra –
This putty works perfectly on uneven walls and fills cracks well. The final surface looks clean and professional.
[...]Samruddhi patil –
Rato Coarse Putty by Mithila Paints delivers excellent filling and leveling on plastered walls. The finish is strong, durable, and easy to work with.
[...]Nikita Bandagar –
Rato Coarse Putty by Mithila Paints delivers excellent filling and leveling on plastered walls. The finish is strong, durable, and easy to work with.
[...]